Matrix Visionpro System Manual page 29

Making an Internal Call
• Lift the handset.
• Dial the desired station's flexible number. For the list of default flexible numbers, see
Modes".
• The called station rings. You get the Ring Back Tone.
• Speech is established when the called station answers.
Stations having access to internal call will only be able to make internal calls. By default, all stations can
make internal calls.
Making an External Call
• Lift the handset.
• Dial a Trunk Access Code (TAC). Default TACs are 0, 5, 61, 62, 63, 64.
• Dial the external number.
Stations having access to trunk and higher Toll Control will only be able to make external calls. For details,
refer "Class of Service (CoS)"
Answering Calls
When a call is placed on your station from an internal caller, then your phone rings as - Trin................
Trin.................... This is called single ring.
If the caller is an external caller, and the trunk call lands on your station, then your phone rings as -
Trin....Trin...............Trin.....Trin............... This is called double ring.
Internal and external calls can be differentiated by the type of rings played.
For details, refer
Programming the System
Many a times it happens that the default settings do not meet our requirements and there is the requirement to
configure the system as per customer/user preferences. Programming is possible from the System Engineer (SE)
or the System Administrator (SA) mode. To begin programming the system, refer
23
and "Toll Control".
"Distinctive Rings".
"Configuration
"Configuring VISIONPRO".
Matrix VISIONPRO System Manual