Matrix Visionpro System Manual page 172

• Decide whether you want to use Manual or Automatic Dynamic lock.
• If you decide to use Manual Dynamic Lock, set the parameter 'minutes' in the command 143-User
Password-Minutes to 00. Here, 'Minutes' specify the time in minutes after which the station gets locked
automatically.
• If you decide to use Automatic Dynamic Lock, set the parameter 'minutes' in the command 143-User
Password-Minutes to a desirable value between 01-99. Here, 'Minutes' specify the time in minutes after
which the station gets locked automatically.
• Use the commands 140 and 141-User Password to lock the station and unlock the station respectively
whenever required.
Change your User Password to avoid misuse of your station. Refer the topic
instructions on changing the password.
How to use
Station users can set Dynamic Lock—Manual or Automatic—by themselves for their station.
To set Dynamic Lock-Manual or Automatic,
• Lift the handset.
• Dial 143-User Password-Minutes. For Dynamic Lock Manual, enter Minutes value as '00' while for
Dynamic Lock Automatic, enter Minutes value between 01-99. By default, it is manual lock.
• You get Confirmation Tone.
• Replace handset.
To lock the station,
• Lift the handset.
• Dial 140
• You get Confirmation Tone.
• Replace handset.
Once the station is locked, you will be able to dial the numbers depending on the dynamic toll control.
To unlock the station,
• Lift the handset.
• Dial 141
• Enter the User Password.
• You get Confirmation Tone.
• Replace handset.
• To change the User Password, refer
• In case you forget your password, do not panic. Contact the System Administrator (SA) or the System
Engineer (SE) so that they can set your password to its default value. Refer
SA Passwords)"
Matrix VISIONPRO System Manual
"User
for more details.
Password".
"User Password" for
"System Security (SE and
166