How to configure
The functioning of this feature is controlled by three parameters, 'Barge-In', 'Privacy from Barge-In' and 'Barge-In
Timer'.
Barge-In and Privacy from Barge-In
First decide which of the stations are to be allowed Barge-In and the stations that are to be protected against
Barge-In. Accordingly enable/disable the features Barge-In and Privacy from Barge-In in the Class of Service of the
station users.
Refer the topic
"Class of Service (CoS)"
Barge-In Timer
It is the time after which the caller gets connected to the called party using Barge-In.
To configure,
•
Enter SE mode.
•
Dial 3016-Seconds
Where,
Default: 010 seconds.
Valid Range: 000 to 255 seconds.
•
Exit SE mode.
How to use
When dialed station is busy,
•
Dial 3 on Busy Tone.
•
You get Ring Back Tone (RBT). The called person gets beeps.
107
and
"Privacy"
for details.
Matrix VISIONPRO System Manual