Matrix Visionpro System Manual page 88

The Global Directory is divided into two parts i.e. Global Directory Part 1 and Global Directory Part 2. A maximum of
90 numbers can be stored in the common memory space called the 'Global Memory'. In Global Directory Part 1 you
can store 45 numbers. Each number is stored at a separate index, that is from 10 to 54. In Global Directory Part 2
you can store 45 numbers. Each number is stored at a separate index, that is from 55 to 99.
These numbers are dialed out using Access Codes 810-899. Here, 8 is the feature access code for Memory Dialing
and 10-99 are the location codes for Global Abbreviated Dialing.
The Global Directory is common for all the users and can be accessed by any station connected to the
VISIONPRO. Make sure this feature is enabled in the Class of Service assigned to the station user. For more
details, see "Class of Service (CoS)".
How to configure
Configuring Personal Directory
To configure a telephone number in the Personal Directory, dial,
• 18-Location Code-Trunk Access Code-Number-#*
Where,
Location Code (Personal Memory Index) is from 00 to 09.
Trunk Access Code is 0, 5, 61, 62, 63, 64. For the list of default TACs applicable to your VISIONPRO
variant, refer "Trunk Access Groups
Number is the telephone number, maximum 16 digits. If the number has less than 16 digits, you must dial
'#*' to terminate the command.
Example: To configure the telephone number 0265-2630555 at directory index 00 with Trunk Access Code '62',
dial
18-00-62-02652630555.
Once this location is configured with the number, dial 800 to call the number.
Configuring Global Directory
• Enter SE mode.
• To configure a telephone number in a Global Directory index, dial,
1301-1-Location Code-Number-#*
Where,
Location Code (Global Memory Index) is from 10 to 99. For Global Directory Part 1, it is from 10 to 54. For
Global Directory Part 2, it is from 55 to 99.
Number is the telephone number, maximum 16 digits. If the number is less than 16 digits, you must dial
'#*' to terminate the command.
Example: To configure the telephone number of Police i.e. 100 at the location code 10, dial 1301-1-10-100#*. To
call the Police, user has to dial 810.
• To clear a single number from a Global Directory index, dial,
1301-1-Location Code-#*
Where,
Location Code is from 10 to 99.
Matrix VISIONPRO System Manual
By default all users are allowed access to Global Directory Part 1 and 2.
(TAGs)".
82