Matrix Visionpro System Manual page 126

Example:
Calls on trunk0 during Night time are to be forwarded to 02653630555 using Trunk Access Group 1.
Solution. Dial the following command to configure this requirement in SE mode,
3702-1-0-1
3703-1-0-1
3704-1-0-02653630555-#*
How to use
Call Forward - Station
To set Call Forward - Station,
• Lift the handset.
• Dial 131 for Call Forward - Unconditionally.
Or,
Dial 133 for Call Forward - If No Reply.
Or,
Dial 134 for Call Forward - If Busy.
• Dial the destination station number where the calls are to be forwarded.
• You get Confirmation Tone.
• Replace the handset.
Example 1:
If Station 23 wants to forward all calls to Station 24, he/she should dial 131-24.
Example 2:
Station 23 wants that if he/she does not answer the calls, calls should be forwarded to Station 24. Then he/she
should dial 133-24.
Example 3:
If station 23 wants to forward all calls to station 24 when he/she is busy, he/she should dial 134-24.
To cancel Call Forward - Station,
• Lift the handset.
• Dial 130.
• You get Confirmation Tone.
• Replace handset.
Call Forward - Trunk
It will function according to the configuration made in the trunk on which Call Forward - Trunk is enabled. Refer
"Call Forward - Trunk" in the section
Matrix VISIONPRO System Manual
"How it works" for details.
120