Matrix Visionpro System Manual page 196

For example: Station A is the first landing destination for calls on Trunk 1. Station A and B are in speech. A
new call lands on Trunk 1. If A has Privacy from Trunk call intrusion/Beeps enabled, A will not hear the
intrusion beeps. The system will land the call on the next landing destination for calls on Trunk 1.
When an incoming trunk call lands on a station from which you have already logged into the Programming
mode and if the station has Privacy from Trunk call intrusion (beeps) disabled, then CCWT (CO Call
Waiting Tone/External Call Waiting Tone) will not be played. However, the external caller will get a busy
alert.
• Privacy from DID: This type of Privacy protects the station from being accessed by external callers using
DID.
For example: This type of Privacy is set on station A. Station A and B are in speech, external caller C uses
DID to call station A. C's call will be blocked and C will get DID Error Tone/DID Error Message.
How to configure
To provide Privacy to a station, you must enable the relevant Privacy options in the
station user.
Example:
Program station 21 such that no other station can Raid it.
Solution. Assign it a Class of Service group with the feature Privacy from Raid enabled.
Matrix VISIONPRO System Manual
"Class of Service (CoS)" of the
190