Matrix Visionpro System Manual page 217

Default SA Password is 1111.
• Exit SE mode.
Forgot your SE and/or SA Password?
It is mandatory to remember the SE/SA Password for programming. It is advisable to make a note of these
passwords at a safe place.
However, if either of these passwords are lost, then it can be set to its default value without altering any other
system settings. This can be done by pressing the Reset Switch.
Pressing the Reset Switch using a blunt pin or similar object for more than 5 seconds restores both the SE and
the SA Passwords to their respective default values (SE Password to 1234 and SA Password to 1111).
User Password (User Security)
The user can secure his/her station from unauthorized access to several features by way of using the User
Password. For operational details on this topic, refer
211
"User Password".
Matrix VISIONPRO System Manual