Matrix Visionpro System Manual page 32

If the SE Password you entered is incorrect, you will get the Error Tone.
System Administrator (SA) Mode
At the System Administrator level, only a limited set of features can be changed. It is a subset of the SE mode and
hence supports only a few programming commands.
The System Administrator may be the operator or the receptionist, or any one responsible for the operation and
maintenance of the system.
The access to SA mode may be protected by means of a password, referred to as the SA Password in this
document. SA Password is a 4-digit secret code used to avoid unauthorized access to SA mode. By default, SA
Password is 1111.
If you forget the SA Password, you can restore it to its default value. For more details, refer
and SA Passwords)".
Entering the SA Mode using a Telephone
• You can enter SA mode only from stations which have 'SA Programming Access' enabled in their
"Class of Service
• Only one person can enter the SA mode at a time.
To enter SA mode from a station phone,
• Dial 1#92-SA Password.
• You get the Confirmation Tone to indicate successful entry into the SA mode.
• Dial SA command strings.
• You get the Confirmation Tone.
To exit the SA mode,
• Dial 00.
• You will hear the Dial Tone of the VISIONPRO.
Following programming commands are allowed from the SA mode:
• Day to Night and Night to Day switching command (if programmed in Manual mode).
• Global Abbreviated Dialing command.
Matrix VISIONPRO System Manual
(CoS)".
"System Security (SE
26