Connecting Single Line Telephones (Slts) - Matrix Visionpro System Manual

Connecting Single Line Telephones (SLTs)

The SLT (FXS) ports provide the interface to connect the Single Line Telephone (SLT) instruments as station
phones. Any standard, two-wire, analog single line telephone instrument like Rotary or Pulse-Tone or Cordless or
Feature phones with or without Calling Line Identification (CLI) support.
A fax machine can also be connected to the SLT port.
The number of SLT ports supported by the configurations of VISIONPRO are:
• VISIONPRO 206: 6 SLT ports
• VISIONPRO 308: 8 SLT ports
• VISIONPRO 412: 12 SLT ports
When connecting Single Line Telephones as stations to your VISIONPRO,
Decide the number of SLT instruments required and arrange them.
1.
You may also connect Fax machines, if required.
Use SLTs equipped with a 'Flash' key, as several of the features and facilities of the VISIONPRO require
you to press Flash. If any of the SLTs you have selected does not have a Flash key, tap the Hook switch of
the phone. It is equivalent to dialing the Flash key and has the same effect.
Use standard twisted wire pair the cables of good quality to connect the analog single line telephone
2.
instruments to the SLT ports (having 2.54 mm Push type connectors) of VISIONPRO. For more
information, refer the steps as mentioned in
Place the SLTs, fax machines at the desired location.
3.
Terminate the cables from the SLT ports of VISIONPRO on the wall jacks.
4.
Connect the SLTs, Fax machine to the wall jacks.
5.
21
"Connecting Trunk Lines to the CO Ports".
Matrix VISIONPRO System Manual