Matrix Visionpro System Manual page 131

To configure as per above instructions,
• Enter SE mode.
• To configure station(s) in Call Pickup Groups, dial,
4301-1-Station-Call Pickup Group
Where,
Station is the software port number from 00 to 07.
Call Pickup Group is from 0 to 9.
• To configure all stations in the same Call Pickup group, dial,
4301-*-Call Pickup Group
• To allow Call Pickup Selective feature to a user, assign him/her a Class of Service with Call Pickup
Selective enabled. Refer
• Exit SE mode.
How to use
To pick up a ringing station in your group,
• Lift the handset.
• Dial 4
• Speak to the caller.
To pick up any ringing station,
• Lift the handset.
• Dial 12
• Dial the number of the ringing station you want to pick up.
• Speak to the caller.
125
"Class of Service (CoS)" for details.
Matrix VISIONPRO System Manual