Matrix Visionpro System Manual page 107

Auto Call Back Ring Timer
Time after which the Auto Call Back ring on a station stops.
To configure,
• Enter SE mode.
• Dial 3014-Seconds
Where,
Default: 030 seconds.
Valid Range: 000 to 255 seconds.
• Exit SE mode.
How to use
Auto Call Back on Busy
To set Auto Call Back on Busy,
• Dial 2 on Busy Tone.
• You get Confirmation Tone.
• Replace handset.
To cancel Auto Call Back,
• Lift handset.
• Dial 102.
• You get Confirmation Tone.
• Replace handset.
Auto Call Back on No Reply
To set Auto Call Back on No Reply,
• Dial Flash on Ring Back Tone.
• Dial 2.
• You get Confirmation Tone
• Replace handset.
To cancel Auto Call Back on No Reply,
• Lift handset.
• Dial 102.
• You get Confirmation Tone.
• Replace handset.
101 Matrix VISIONPRO System Manual