Matrix Visionpro System Manual page 56

• In Night time, station 21 and 22 should ring continuously. Station 27 and 28 should ring for first 30 seconds
along with station 21 and 22.
Solution. The requirement is for trunk landing destinations. Two station groups one for Day time and other for Night
time should be formed to meet the requirement.
Use following commands in SE mode:
4702-1-01-0-00
4702-1-01-1-01
4702-1-01-2-02
4702-1-01-3-03
4703-1-01-0-20
4703-1-01-1-20
4703-1-01-2-20
4703-1-01-3-20
4704-1-01-0-0
4704-1-01-1-0
4704-1-01-2-0
4704-1-01-3-0
Refer "Trunk Landing Groups (TLGs)"
for Day time.
4702-1-02-0-00
4702-1-02-1-01
4702-1-02-2-06
4702-1-02-3-07
4703-1-02-0-30
4703-1-02-1-30
4703-1-02-2-30
4703-1-02-3-30
4704-1-02-0-1
4704-1-02-1-1
4704-1-02-2-0
4704-1-02-3-0
4705-1-02-0
Refer "Trunk Landing Groups (TLGs)"
for Night time.
Matrix VISIONPRO System Manual
to assign a station group to a trunk. Station group1 can be assigned to trunk1
to assign a station group to a trunk. Station group2 can be assigned to trunk2
50