Allowed And Denied Lists - Matrix Visionpro System Manual

Allowed and Denied Lists

Allowed and denied lists are a group of number strings. VISIONPRO uses these lists to support three different
features - Toll Control, Dynamic Lock and Call Duration Control.
Call Duration
Control
Allowed List
And
Denied List
Dynamic Lock
Toll Control
Association of Allowed list and Denied list with Toll Control
When a number is dialed out from a station, VISIONPRO compares the dialed number string with the number
strings in allowed and denied lists provided proper lists have been assigned to the station. Refer "Toll Control" for
details.
Association of Allowed list and Denied list with Dynamic Lock
If you lock your station and thereafter dial out a number, VISIONPRO will compare the dialed number string with the
number strings in allowed and denied lists for the locked status. You must assign the required allowed and/or
denied number list to the station. Refer "Dynamic Lock" for details.
Association of Allowed list and Denied list with Call Duration Control
If Call Duration Control feature is set for a station, VISIONPRO compares the dialed number string with the number
strings in allowed and denied lists for Call Duration Control (CDC) set condition. VISIONPRO disconnects the call if
the number string dialed by the station matches with the denied list for CDC condition. Refer "Call Duration Control
(CDC)" for details.
How it works
You can configure a maximum of 8 allowed lists and 8 denied lists. Maximum 16 entries (or, number strings) can be
programmed in one allowed or one denied list.
Each entry in either list can be up to 16 characters long.
The number strings can be complete telephone numbers, area codes or few initial digits of telephone numbers.
Matrix VISIONPRO System Manual 94