Configuring the Companding Type
•
Enter SE mode.
•
Dial, 1108-Code
Where,
Code
Companding Type
0
A-law
-law
1
Default code is 0.
•
Exit SE mode.
Displaying the System's Version and Revision
•
Enter SE mode from a station having the CLI support.
•
Dial, 1110
•
You get the Confirmation Tone.
•
Replace your handset.
•
You get an incoming ring and the system's version-revision is displayed on the LCD of the station. The
display format of system's version-revision varies depending on the CLIP Type set for the station.
•
If programmed CLIP Type for the station is DTMF, display format is "<Version No><Revision No>". For
example, "0101".
•
If programmed CLIP Type for the station is either FSK-V.23 or FSK-BellCore, display format is
"V<Version No>R<Revision No>". For example, "V01R01".
•
Exit SE mode.
Matrix VISIONPRO System Manual
208