Arp Commands - D-Link DGS-3224SR Command Line Interface Reference Manual

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
ARP C
The ARP commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following
table.
Command Parameters
config arp_aging time <value 0-65535>
show arpentry {ipif(1) <ipif_name 12> | ipaddress(2)
<ipaddr> | static(3)}
Each command is listed, in detail, in the following sections.
config arp_aging
Purpose Used to configure the age-out timer for ARP
table entries on the switch.
Syntax config arp_aging time <value 0-65535>
Description This command sets the maximum amount
of time in minutes that a ARP entry can
12
OMMANDS
135