Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
To set up static router ports:
DGS-3224SR:4#config router_ports default add 1-10
Command: config router_ports default add 1:1-1:10
Success.
DGS-3224SR:4#
config router_ports_forbidden
Purpose
Used to configure ports as forbidden ports.
config router_ports_forbidden
Syntax
<vlan_name 32> [add | delete] <portlist>
Description
This command allows you to designate a
range of ports as being forbidden ports.
Parameters
<vlan_name> − The name of the VLAN on
which the router port resides. Maximum 32
characters.
<portlist> − Specifies a range of ports which
will be configured as router ports. The
portlist is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
Thus, 1:3-2:4 specifies all of the ports
196
Advertisement
Table of Contents
