Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Command
show igmp_snooping
group
config
router_ports_forbidde
n
disable
igmp_snooping
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Used to configure IGMP snooping on the
switch.
Syntax
config igmp_snooping [<vlan_name>|all]
{host_timeout <sec>|router_timeout
<sec>|leave_timer <sec>|state
[enabled|disabled]}
Description
This command allows you to configure
IGMP snooping on the switch|
Parameters
<vlan_name> − The name of the VLAN for
which IGMP snooping is to be configured.
host_timeout
maximum amount of time a host can be a
member of a multicast group without the
switch receiving a host membership report.
The default is 260 seconds. Maximum
Parameters
forbidden}
{vlan <vlan_name 32>}
<vlan_name 32> [add|delete] <portlist>
−
<sec>
Specifies
190
the
Advertisement
Table of Contents
