Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config 802.1x auth_parameter
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure 802.1x authentication parameters for ports
1 to 20:
DGS-3224SR:4#config 802.1x auth_parameter ports 1:1-1:20
direction both
Command: config 802.1x auth_parameter ports 1:1-1:20 direction
both
Success.
DGS-3224SR:4#
config 802.1x init
Purpose
Used to initialize the 802.1x functions on a
range of ports.
Syntax
config
[<portlist>|all]
Description
The config 802.1x init command is used to
immediately initialize the 802.1x functions
on a range of ports.
<portlist> − Specifies a range of ports. The
Parameters
portlist is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
802.1x
init
port_based
212
ports
Advertisement
Table of Contents
