Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
SNTP C
The Simple Network Time Protocol (SNTP) (an adaptation of the
Network Time Protocol (NPT)) commands in the Command Line
Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
Parameters
config sntp
{primary <ipaddr> | secondary <ipaddr> |
poll-interval <int 30-99999>}
enable sntp
disable sntp
show sntp
config time
<date ddmthyyyy> <time hh:mm:ss>
config time_zone
{operator [+|-] | hour <gmt_hour 0-13> | min
<minute 0-59>}
Each command is listed, in detail, in the following sections.
config sntp
25
OMMANDS
261
Advertisement
Table of Contents
