Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
DGS-3224SR:4#
show auth_statistics
Purpose
Used to display the switch's authentication
statistics.
Syntax
show auth_statistics {ports <portlist>}
Description
The show auth_statistics command is used
to display authentication statistics.
ports <portlist> − Specifies a range of ports.
Parameters
The portlist is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
Thus, 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4, in numerical order.
Restrictions
None.
Example Usage:
To display authentication statistics:
DGS-3224SR:4#show auth_statistics ports 1
Command: show auth_statistics
Port number : 1:1
222
Advertisement
Table of Contents
