Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config 802.1x init
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
Thus, 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4, in numerical order.
all − Specifies all of the ports on the switch.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To initialize 802.1x port-based functions on ports 1 to
15:
Command: config 802.1x init port_based ports 1:1-1:15
Success.
DGS-3224SR:4#
config 802.1x reauth
Purpose
Used
authentication feature of the switch.
Syntax
config 802.1x reauth port_based ports
[<portlist>|all]
Description
The config 802.1x reauth command is used
to enable the 802.1x re-authentication
feature on the switch.
to
configure
the
802.1x
213
re-
Advertisement
Table of Contents
