Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
To delete an SNMP host entry:
DGS-3224SR:4#delete snmp host 10.52.19.2
Command: delete snmp host 10.52.19.2
Success.
DGS-3224SR:4#
show snmp host
Purpose
Used to display the recipient of SNMP traps
generated by the switch's SNMP agent.
Syntax
show snmp host {<ipaddr>}
Description
The show snmp host command is used to
display the IP addresses and configuration
information of remote SNMP managers that
are designated as recipients of SNMP traps
that are generated by the switch's SNMP
agent.
Parameters
<ipaddr> − The IP address of a remote
SNMP manager that will receive SNMP
traps generated by the switch's SNMP
agent.
Restrictions
None.
Example Usage:
To display the currently configured SNMP hosts on the
switch:
DGS-3224SR:4#show snmp host
Command: show snmp host
73
Advertisement
Table of Contents
