Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config 802.1x reauth
Parameters
<portlist> − Specifies a range of ports. The
portlist is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
Thus, 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4, in numerical order.
all − Specifies all of the ports on the switch.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure 802.1x reauthentication for ports 1-15:
DGS-3224SR:4#config 802.1x reauth port_based ports 1-15
Command: config 802.1x reauth port_based ports 1:1-1:15
Success.
DGS-3224SR:4#
config radius add
Purpose
Used to configure the settings the switch
will use to communicate with a Radius
214
Advertisement
Table of Contents
