DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Example Usage:
To configure the IP interface System:
DGS-3224SR:4#config ipif System ipaddress 10.52.19.2/8
vlan george state enabled
Command: config ipif System ipaddress 10.52.19.2/8
vlan george state enabled
Success.
DGS-3224SR:4#
show ipif
Purpose
Used to display the configuration of an IP
interface on the switch.
Syntax
show ipif {<ipif_name>}
Description
This
configuration of an IP interface on the
switch.
<ipif_name> − The name of the IP interface
Parameters
you want to disable.
all
configured on the switch will be disabled.
Restrictions
none.
command
will
−
Specifies
that
all
187
display
the
IP
interfaces