Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
create vlan
Purpose
Used to create a VLAN on the switch.
create vlan <vlan_name> {tag
Syntax
<vlanid>|advertisement}
Description
This command allows you to create a VLAN
on the switch.
Parameters
<vlan_name> − The name of the VLAN to be
created.
<vlanid> − The VLAN ID of the VLAN to be
created. Range is 1-4094.
advertisement − Specifies the VLAN as able
to join GVRP. If this parameter is not set,
the switch cannot be configured to have
forbidden ports.
Restrictions
Each VLAN name can be up to 32
characters. If the VLAN is not given a tag, it
is a port-based VLAN. Only administrator-
level users can issue this command.
Example Usage:
To create a VLAN v1, tag 2:
DGS-3224SR:4#
DGS-3224SR:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
165
Advertisement
Table of Contents
