D-Link DGS-3224SR Command Line Interface Reference Manual page 274

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config port_security
Commands). Specify DeleteOnReset to delete all
FDB entries, including static entries upon system
reset or rebooting.
Restriction Only administrator-level
s command.
Usage Example:
To display all of the commands in the CLI:
DGS-3224SR:4#config port_security ports 1:5-1:6 admin_state
enabled max_learning
_addr 5 lock_address_mode DeleteOnTimeout
Command: config port_security ports 1:5-1:6 admin_state enabled
max_learning_add
r 5 lock_address_mode DeleteOnTimeout
Success.
DGS-3224SR:4#
show port_security
Purpose Used to display the current port security
configuration.
Syntax {ports <portlist>}
Description This command is used to display port
security information of the switch ports.
The information displayed includes port
security admin state, maximum number of
users can
274
issue this