Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Example Usage:
To create an SNMP host to receive SNMP messages:
DGS-3224SR:4#create snmp host 10.59.19.2 v3 noauth_nopriv
initial
Command: create snmp host 10.59.19.2 v3 noauth_nopriv initial
Success.
DGS-3224SR:4#
delete snmp host
Purpose
Used to remove a recipient of SNMP traps
generated by the switch's SNMP agent.
delete snmp host <ipaddr>
Syntax
Description
The delete snmp host command deletes a
recipient of SNMP traps generated by the
switch's SNMP agent.
Parameters
<ipaddr> − The IP address of a remote
SNMP manager that will receive SNMP
traps generated by the switch's SNMP
agent.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
72
Advertisement
Table of Contents
