Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Command
Parameters
config fdb
<sec 10-1000000>
aging_time
Each command is listed, in detail, in the following sections.
create fdb
Purpose
Used to create a static entry to the unicast
MAC address forwarding table (database)
Syntax
create fdb {<vlan_name32> <macaddr>
port <port>}
Description
This command will make an entry into the
switch's unicast MAC address forwarding
database.
Parameters
<vlan_name> − The name of the VLAN on
which the MAC address resides.
<macaddr> − The MAC address that will be
added to the forwarding table.
<port> − The port number corresponding to
the MAC destination address. The switch
will always forward traffic to the specified
device through this port.
Restrictions
Only administrator-level users can issue
this command.
121
Advertisement
Table of Contents
