Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
create access_profile
Masks
combined with the values the switch finds
in
the
Specific values for the rules are entered
using the config access_profile command,
below.
ethernet − Specifies that the switch will
Parameters
examine the layer 2 part of each packet
header.
vlan − Specifies that the switch will
examine the VLAN part of each packet
header.
source_mac <macmask> − Specifies a
MAC address mask for the source MAC
address. This mask is entered in the
following hexadecimal format,
destination_mac <macmask> − Specifies
a MAC address mask for the destination
MAC address.
802.1p − Specifies that the switch will
examine the 802.1p priority value in the
frame's header.
ethernet_type − Specifies that the switch
will examine the Ethernet type value in
each frame's header.
ip − Specifies that the switch will examine
the IP address in each frame's header.
vlan − Specifies a VLAN mask.
source_ip_mask <netmask> − Specifies
an IP address mask for the source IP
address.
can
be
entered
that
specified
frame
header
233
will
be
fields.
Advertisement
Table of Contents
