Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config access_profile
access profile will apply to packets that
contain this value in their 802.1p priority
field of their header.
replace_priority − This parameter is
specified if you want to change the 802.1p
user priority of a packet that meets the
specified criteria. Otherwise, a packet will
have its incoming 802.1p user priority re-
written to its original value before being
transmitted from the switch.
replace_dscp <value 0-63> − Allows you to
specify a value to be written to the DSCP
field of an incoming packet that meets the
criteria specified in the first part of the
command. This value will over-write the
value in the DSCP field of the packet.
delete <value 1-255> − Specifies that the
access ID of a rule you want to delete.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure access list entry:
DGS-3224SR:4#config access_profile profile_id 8 add access_id
1 ethernet vlan de
config access_profile profile_id 8 add access_id 1
ethernet vlan de
fault ethernet_type 0x800
Command: config access_profile profile_id 8 add access_id 1
241
Advertisement
Table of Contents
