Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
create access_profile
src_port_mask
Specifies a UDP port mask for the source
port.
dst_port_mask
Specifies a UDP port mask for the
destination port.
protocol_id − Specifies that the switch will
examine each frame's Protocol ID field.
user_mask
Specifies that the rule applies to the IP
protocol ID and the mask options behind
the IP header.
permit − Specifies that packets that match
the access profile are permitted to be
forwarded by the switch.
deny − Specifies that packets that do not
match the access profile are not permitted
to be forwarded by the switch and will be
filtered.
profile_id <value 1-8> − Specifies an index
number that will identify the access profile
being created with this command.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To create access list rules:
Command: create access_profile ethernet vlan source_mac 00-
00-00-00-00-01 destin
ation_mac 00-00-00-00-00-02 802.1p ethernet_type permit
profile_id 8
<hex
0x0-0xffff>
<hex
0x0-0xffff>
<hex
0x0-0xffffffff>
235
−
−
−
Advertisement
Table of Contents
