Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config traffic control
Purpose
Used
traffic control.
Syntax
config
[<storm_grouplist>|all]
[enable|disable]|multicast
[enable|disable]|dlf
[enable|disable]|threshold <value>}
Description
This
broadcast/multicast/dlf storm control.
<storm_grouplist> − Used to specify a
Parameters
broadcast storm control group with the
syntax: unit_id.
all − Specifies all broadcast storm control
groups on the switch.
broadcast [enabled|disabled] − Enables or
disables broadcast storm control.
multicast [enabled|disabled] − Enables or
disables multicast storm control.
dlf [enabled|disabled] − Enables or disables
dlf traffic control.
threshold <value> − The upper threshold at
which
switched on. The <value> is the number of
broadcast|multicast|dlf packets, in Kbps,
received by the switch that will trigger the
storm traffic control measures.
to
configure
broadcast|multicast
traffic
command
is
used
to
the
specified
traffic
132
control
{broadcast
configure
control
is
Advertisement
Table of Contents
