Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config scheduling
being the lowest priority. (The max value of
n is 6, and class_id 7 is reserved for internal
control packet use.)
max_packet – specifies the weights for
weighted fari queueing. Max_packet is the
maximum number of packets the hardware
priority queue will be allowed to transmit
before allowing the next lowest priority
queue to transmit its packets. A value
between 0 and 15 can be used.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure the traffic scheduling mechanism for each
COS queue:
DGS-3224SR:4#config scheduling 1 max_packet 10
Command: config scheduling 1 max_packet 10
Success.
show scheduling
Purpose
Used
scheduling mechanisms in use on the
switch.
Syntax
show scheduling
to
display
the
current
144
traffic
Advertisement
Table of Contents
