Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config radius add
will use to communicate with a Radius
server.
Syntax
config radius add <server_index 1-3>
<server_ip>
[default|{auth_port <udp_port_number>|
acct_port <udp_port_number>}]
Description
The config radius add command is used to
configure the settings the switch will use to
communicate with a Radius server.
<server_index 1-3> − Assigns a number to
Parameters
the current set of Radius server settings.
Up to three groups of Radius server
settings can be entered on the switch.
<server_ip> − The IP address of the Radius
server.
key − Specifies that a password and
encryption key will be used between the
switch and the Radius server.
<passwd 32> − The shared-secret key
used by the Radius server and the
switch. Up to 32 characters can be used.
default − Returns all of the ports in the
range to their default Radius settings.
auth_port <udp_port_number> − The UDP
port number for authentication requests.
The default is 1812.
acct_port <udp_port_number> − The UDP
key
<passwd
215
32>
Advertisement
Table of Contents
