Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
create snmp user
Purpose
Used to create a new SNMP user and adds
the user to an SNMP group that is also
created by this command.
Syntax
create snmp user <SNMP_name32>
<groupname 32> {encrypted(1)
[by_password(1) auth[md5(2)
<auth_password 8-16 > | sha(3)
<auth_password 8-20 >]priv [none(1) |
des(2) <priv_password 8-16> ]| by_key(2)
auth [md5(2) <auth_key 32-32>| sha(3)
<auth_key 40-40>]priv [none(1) |des(2)
<priv_key 32-32> ]]}
Description
The create snmp user command creates a
new SNMP user and adds the user to an
SNMP group that is also created by this
command.
Parameters
<SNMP_name> − An alphanumeric name of
up to 32 characters that will identify the
new SNMP user.
<groupname 32> − An alphanumeric name
of up to 32 characters that will identify the
SNMP group the new SNMP user will be
associated with.
encrypted – Specifies that the password will
be in an encrypted format.
by_password – Indicate input password for
authentication and privacy.
by_key – Indicate input key for
authentication and privacy.
52
Advertisement
Table of Contents
