DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Command: show trusted_host
Management Stations
IP Addrress
---------------
Total Entries: 0
DGS-3224SR:4#
enable snmp traps
Purpose
Used to enable SNMP trap support.
enable snmp traps
Syntax
Description
This command is used to enable SNMP trap
support on the switch.
Parameters
none.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To turn on SNMP trap support:
DGS-3224SR:4#enable snmp traps
Command: enable snmp traps
Success.
82