D-Link DGS-3224SR Command Line Interface Reference Manual page 175

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
create link_aggregation group_id
Purpose Used to create a link aggregation group on
the switch.
Syntax create link_aggregation group_id <value>
Description This
aggregation group.
Parameters <value> − Specifies the group id. The
switch allows up to 32 link aggregation
groups to be configured. The group number
identifies each of the groups.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To create link aggregation group:
DGS-3224SR:4#create link_aggregation group_id 1 type
lacp
Command: create link_aggregation group_id 1 type lacp
Success.
DGS-3224SR:4#
delete link_aggregation group_id
Purpose Used to delete a previously configured link
aggregation group.
command will create
175
a link