Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
create snmp user
auth – Initiates an authentication level
setting session. The options are MD5 and
SHA.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To create an SNMP user on the switch:
DGS-3224SR:4#
create snmp user dlink default encrypted by_password
auth md5 auth_password none
Command: create snmp user dlink default encrypted by_password auth
md5 auth_password priv none
Success.
DGS-3224SR:4#
md5 – The HMAC-MD5-96
authentication level.
sha – The HMAC-SHA-96
authentication level.
<auth_password 8-16> − An
alphanumeric sting of between 8 and
20 characters that will be used to
authorize the agent to receive packets
for the host.
<priv_password 8-16> − An
alphanumeric string of between 8 and
16 characters that will be used to
encrypt the contents of messages the
host sends to the agent.
<auth_key> – An authentication key
used by MD5 or SHA1, hex string type.
<priv_key> – A privacy key used by
DES, it is hex string type.
53
Advertisement
Table of Contents
