Ip Interface Commands - D-Link DGS-3224SR Command Line Interface Reference Manual

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
The IP interface commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config ipif System [{ipaddress <network_address> | vlan
<vlan_name> | state [enabled|disabled]} |
bootp | dhcp]
show ipif <ipif_name>
Each command is listed, in detail, in the following sections.
Each command is listed, in detail, in the following sections.
config ipif System
17
IP I
NTERFACE
C
OMMANDS
185