Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config access_profile
tcp − Specifies that the switch will
exmamine the Transmission Control
Protocol (TCP) field within each packet.
src_port <value 0-65535> − Specifies
that the access profile will apply only to
packets that have this TCP source port
in their TCP header.
dst_port <value 0-65535> − Specifies
that the access profile will apply only to
packets that have this TCP destination
port in their TCP header.
udp − Specifies that the switch will
examine the Universal Datagram Protocol
(UDP) field in each packet.
src_port <value 0-65535> − Specifies
that the access profile will apply only to
packets that have this UDP source port
in their header.
dst_port <value 0-65535> − Specifies
that the access profile will apply only to
packets that have this UDP destination
port in their header.
protocol_id <value 0-255> − Specifies
that the switch will examine the Protocol
field in each packet and if this field
contains the value entered here, apply
the following rules.
user_define <hex 0x0-0xfffffff> −
Specifies a mask to be combined with
the value found in the frame header
using a logical AND operaiton.
priority <value 0-7> − Specifies that the
240
Advertisement
Table of Contents
