D-Link DGS-3224SR Command Line Interface Reference Manual page 31

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Baud Rate : 115200
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DGS-3224SR:4#
config serial_port
Purpose Used to configure the serial port.
Syntax config serial_port {baud_rate 115200|
auto_logout
[never|2_minutes|5_minutes|10_minutes|
15_minutes]}
Description This command is used to configure the serial
port's baud rate and auto logout settings.
Parameters 115200 − The serial bit rate that will be used
to communicate with the management host.
never − No time limit on the length of time the
console can be open with no user input.
2_minutes − The console will log out the
current user if there is no user input for 2
minutes.
5_minutes − The console will log out the
current user if there is no user input for 5
minutes.
10_minutes − The console will log out the
current user if there is no user input for 10
minutes.
31