Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
show error ports
Syntax
show error ports <portlist>
Description
This command will display all of the packet
error statistics collected and logged by the
swtich for a given port list.
Parameters
<portlist> − specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range.
The DGS3224SR is a stackable switch and
each port is designated as belonging to a
particular switch in the stack. For example,
port 2 in switch 5 in a stack is listed as 2-
5. A range of ports would be shown as 2-5,
3-6 (port 3 in switch 6), with the beginning
and the end of the range of switches
separated by a comma.
Restrictions
none.
Example Usage:
To display the errors of the port 3:
DGS-3224SR:4#show error ports 1
Command: show error ports 1:1
Port number : 1:1
RX Frames
TX Frames
96
Advertisement
Table of Contents
