Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config 802.1x auth_protocol
this command.
Example Usage:
To configure 802.1x authentication protocol:
DGS-3224SR:4#config 802.1x auth_protocol local
Command: config 802.1x auth_protocol local
Success.
DGS-3224SR:4#
config 802.1x capability
Purpose
Used to configure the 802.1x capability of a
range of ports on the switch.
config 802.1x capability ports
Syntax
[<portlist>|all] [authenticator|none]
Description
The config 802.1x command has two
capabilities that can be set for each port:
Authenticator and None.
Parameters
<portlist> − Specifies a range of ports. The
portlist is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
208
Advertisement
Table of Contents
