Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config traffic_segmentation
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
Thus, 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4, in numerical order.
forward_list – specifies a range of port
forwarding domain.
all – includes entire range ofports
null – specifies a range of port forwarding
domain as null.
Restrictions
Administrator privileges are needed to
issue this command.
Usage Example:
To configure traffic segmentation:
DGS-3224SR:4#config traffic_segmentation 1:1-1:10 forward_list
all
Command: config traffic_segmentation 1:1-1:10 forward_list all
Success.
DGS-3224SR:4#
245
Advertisement
Table of Contents
