Igmp Snooping Commands - D-Link DGS-3224SR Command Line Interface Reference Manual

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
IGMP S
The switch port commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the
following table.
Command
config igmp_snooping
config igmp_snooping
querier
config router_ports
enable igmp snopping
show igmp snooping
show router ports
NOOPING
C
OMMANDS
Parameters
[<vlan_name32> | all] {host_timeout
<sec> |
router_timeout <sec> | leave_timer
<sec>
state [enabled|disabled]}
[<vlan_name> | all] {query_interval
<sec> |
max_response_time <sec> |
robustness_variable <value> |
last_member_query_interval <sec>|
state [enabled|disabled]
<vlan_name> [add|delete]
<portlist>
forward_mcrouter_only
vlan <vlan_name>
vlan {<vlan name>} {static | dynamic |
189
18