Traffic Segmentation Commands - D-Link DGS-3224SR Command Line Interface Reference Manual

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
T
RAFFIC
Command Parameters
config <portlist> forward_list [all | null |
traffic_segmentatio <portlist>]
n
show
traffic_segmentatio {<portlist>}
n
Each command is listed, in detail, in the following sections.
config traffic_segmentation
Purpose Used to configure the traffixc segmentation.
Syntax config
forward_list [all | null | <portlist>]
Description This
segmentation.
Parameters <portlist> - Specifies a range of ports. The
portlist is specified by listing the lowest
S
EGMENTATION
C
OMMANDS
traffic_segmentation
command configures
244
21
<portlist>
traffic