D-Link DGS-3224SR Command Line Interface Reference Manual page 252

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config all_boxes_id
Purpose Used to configure box IDs for switches in a
stack.
Syntax [static_mode | auto_mode]
Description This command will determine the mode of
assigning box IDs.
Parameters static_mode – user assigns box IDs
auto_mode
automatically
Restrictions Administrator privileges are needed to
issue this command.
Usage Example:
To configure box type:
DGS-3224SR:4#config all_boxes_id auto_mode
Command: config all_boxes_id auto_mode
Success.
DGS-3224SR:4#
– box Ids are
252
assigned