DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config traffic control
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure traffic control and state:
DGS-3224SR:4#config traffic control all broadcast
enable multicast enable dlf enable threshold 255
Command: config traffic control all broadcast enable
multicast enable dlf enable
threshold 255
Success.
DGS-3224SR:4#
show traffic control
Purpose
Used to display current traffic control
settings.
Syntax
show
{group_list<storm_grouplist>}
Description
This command displays the current storm
traffic control configuration on the switch.
Parameters
group_list <storm_grouplist> − Used to
specify a broadcast storm control group
with the syntax: unit_id:group_id.
traffic
133
control