Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config 802.1x capability
Thus, 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4, in numerical order.
all − Specifies all of the ports on the switch.
authenticator − A user must pass the
authentication process to gain access to
the network.
none − The port is not controlled by the
802.1x functions.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure 802.1x capability on ports 1-10:
DGS-3224SR:4#config 802.1x capability ports 1:1-1:10
authenticator
Command: config 802.1x capability ports 1:1-1:10 authenticator
Success.
DGS-3224SR:4#
config 802.1x auth_parameter
Purpose
Used
Authentication parameters on a range of
ports. The default parameter will return all
ports in the specified range to their default
802.1x settings.
config
Syntax
to
configure
the
802.1x
auth_parameter
209
802.1x
ports
Advertisement
Table of Contents
