Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config syslog host
Purpose
Used
parameters.
Syntax
Config
{severity [informational | warning | all]
| facility | local0 | local1 |local2 |
local3 | local4 | local5 | local6 | local7 ]
|
ipaddress <ipaddr> | state [enable |
disable]}
Description
This command configures the syslog host
parameters.
Parameters
Host – host index or all hosts
Severity – three levels are supported:
Informational: informational messages
Warning: warning conditions
All: any condition
local0 to local7 – these are user-defined
facilities
udp_port – udp port number
ipaddr – IP address of the host
state – enables or disables reception of
event-notification messages
Restrictions
Only administrator-level users can use this
command.
DGS-3224SR:4#config syslog host all severity all facility
local0
to
configure
the
syslog
host
[all
udpport
<udp_port_number>
104
syslog
host
|<index>
]
|
Advertisement
Table of Contents
